Xinyue Steel Seamless Steel Pipe to Sri Lanka for inventory

 Project location：Sri Lanka

Product：Seamless Steel Pipe

Standard and material：API 5L PSL1 / ASTM A106 Gr. B

Specifications：33.4-273mm

Xinyue Steel Seamless Steel Pipe to Sri Lanka for inventory

This order comes from an long-cooperation customer for more than 10 years and has been developing steadily.

This customer regularly orders seamless steel pipes from Xinyue as inventory for local sales every year. This order is a same order as before, which once again confirms the trust and recognition of Xinyue products. What is even more gratifying is that this customer fully authorized Xinyue to fully control the production process, quality inspection and logistics, expressing his confidence and support for us.

Xinyue is not only the customer's first supplier in China, but also a long-term partner of trust and cooperation. Recently, this customer visited Xinyue’s headquarters, seamless steel pipe factory and pipe fittings factory, and expressed high recognition of our services and production capabilities. He expect to work with Xinyue to expand the local sales market, which is our common goal and vision.

We know that our customers' trust and support are the driving force for us to move forward. Xinyue will continue to be committed to providing high-quality products and excellent services, and working with every customer to create a better future!

Contact us if you have any interest in our product.

Whatsapp: +8619974902549

Mail: marketing@xysteelpipe.com

Website:www.tjxysteel.com

评论

发表评论

此博客中的热门博文

Seamless steel tube production process

　　The production method of seamless steel pipe is roughly divided into a cross-rolling method (Mengnesmann method) and an extrusion method. The cross-rolling method (Mennesmann method) is to first pierce the tube with a diagonal roll and then extend it with a rolling mill. This method has a high production speed, but has high requirements on the processability of the tube blank, and is mainly suitable for the production of carbon steel and low alloy steel tubes. The extrusion method uses a piercing machine to perforate a tube blank or a steel ingot, and then extrudes it into a steel tube by an extruder. This method is less efficient than the cross-rolling method and is suitable for producing a high-strength alloy steel tube. 　　Both the cross-rolling method and the extrusion method must first heat the tube blank or the ingot, and the produced steel tube is called a hot rolled tube. Steel pipes produced by hot working can sometimes be cold worked as needed. There are two methods for co...
阅读全文

Specification of J55 Oil Casing Pipe

　　J55 casing pipe is an important equipment for oil drilling. Its main equipment also includes drill pipe, core pipe and casing, drill collar and steel pipe for small diameter drilling. 　　J55 oil casing specifications are mainly 139.7*7.72, 177.8*9.19, 244.5*8.94, 244.5*10.03, 244.5*11.05, etc. 　　J55 oil casing-API has three lengths: R-1 is 4.88 ~ 7.62m, R-2 is 7.62 ~ 10.36m, and R-3 is 10.36m to longer. Some imported goods are marked with the word LTC, namely the filament sleeve. In addition to adopting API standards, there are a small number of Japanese factory standards imported from Japan. 　　Commonly used casing steel grades are DZ40, DZ55, DZ753. 　　According to SY/T6194-96. The tube and its couplings are of the same steel grade. Sulfur content <0.045%, phosphorus content <0.045%. 　　Take chemical analysis samples according to the provisions of GB222-84. Chemical analysis was carried out in accordance with the relevant provisions of GB223. 　　According to the Americ...
阅读全文

Heat treatment method for carbon steel pipe

　　Each kind of steel pipe would have its heat treatment during production process. No matter you are seamless steel pipe or ERW steel pipe, we should figure out the method before production. Today, we would have an introduction for heat treatment method for carbon steel pipe. 　　There are two methods for improving carbon steel pipe’s performance. One is adjusting the chemical composition of the steel alloying; the other is the heat treatment. For the heat treatment, we should combine it with shaping deformation. Of course, in the field of modern industrial technology, heat treatment to improve the performance of the steel still occupy a dominant position. 　　Thus, for wholesale carbon steel pipes, it is important to figure out the chemical characters for each kind of steel pipe. 　　 http://www.xysteelpipe.com/info/Heat-treatment-method-for-carbon-steel-pipe-1230-1.htm
阅读全文